Om Steel
Om Steel
Mumbai, Maharashtra
Send SMS
Send E-mail

Nickel Alloy

Offering you a complete choice of products which include inconel sheets, nickel 201 strips, nickel 200, nickel alloy foils, nickel sheets and pure nickel.
Get CALLBACK

Inconel Sheets

Inconel Sheets
 
Get Best Quote
Approx. Rs 3,500 / KgGet Latest Price

Product Details:
Material GradeInconel
MaterialInconel
ThicknessVarious
ShapeSquare, Rectangle, Round
LengthAs per requirement
Sizeas per requirement
Sizesas per requirement

Inconel Sheets is our main speciality.

we can supply Inconel sheets in new condition as per ustomers size requirement



Yes! I am Interested
Get CALLBACK

Nickel 201 Strips

Nickel 201 Strips
 
Get Best Quote
Approx. Rs 4,000 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity50 Kilogram
MaterialNickel 201
GradeNickel 201
Size0.1mm to 5mm
Surface FinishingBright
Diameter10mm to 500mm
Packing Sizestandard Packing

Introduction

Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.

It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution.

The following section will discuss in detail about nickel 201 alloy.

Chemical Composition

The chemical composition nickel 201 alloy is outlined in the following table.

ElementContent (%)
Nickel, Ni≥ 99
Iron, Fe≤ 0.4
Manganese, Mn≤ 0.35
Silicon, Si≤ 0.35
Copper, Cu≤ 0.25
Carbon, C≤ 0.020
Sulfur, S≤ 0.010
Physical Properties

The following table shows the physical properties of nickel 201 alloy.

PropertiesMetricImperial
Density8.89 g/cm30.321 lb/in3
Melting point1435 - 1446°C2615 - 2635°F
Mechanical Properties

The mechanical properties of nickel 201 alloy are displayed in the following table.

PropertiesMetricImperial
Tensile strength (annealed)403 MPa58500 psi
Yield strength (annealed)103 MPa14900 psi
Elongation at break (annealed prior to test)50%50%
Thermal Properties

The thermal properties of nickel 201 alloy are given in the following table

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)13.1 µm/m°C7.28 µin/in°F
Thermal conductivity79.3 W/mK550 BTU.in/hrft².°F
Other Designation

Other designations that are equivalent to nickel 201 alloy include the following:

  • ASME SB-160 – SB 163
  • SAE AMS 5553
  • DIN 17740
  • DIN 17750 - 17754
  • BS 3072-3076
  • ASTM B 160 - B 163
  • ASTM B 725
  • ASTM B730
Applications

The following are the list of applications of nickel 201 alloy:

  • Caustic evaporators
  • Combustion boats
  • Electronic components
  • Plater bars.

Additional Information:
  • Delivery Time: 1 to 30 days
  • Packaging Details: Standard Export packing
Yes! I am Interested
Get CALLBACK

Nickel 200

Nickel 200
 
Get Best Quote
Approx. Rs 4,000 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity50 Kilogram
MaterialNickel
Size0.1mm to 10mm
FormSheet, Rods, Wire, Strips
GradeNickel 200
Packing TypeStandard packing
Surface FinishingBright

Strip, Coil, Foil, Wire, ASTM B162 APPLICATIONS 

Lead wires, battery components, transducers, sparking electrodes, and heat exchangers 

DESCRIPTION 

Alloy 200 is a wrought commercially pure Nickel with a maximum carbon level of 0.15%. This alloy provides highly ductile mechanical properties across a wide temperature range. It provides corrosion resistance in neutral to moderately reducing environments. Nickel 200 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Nickel 200 is not recommended for service above 600 ° F (316 ° C) because long-time exposures in the 800° F to 1200° F range result in precipitation of a carbon containing phase and loss of ductility. 

CHEMISTRY TYPICAL 

Nickel + Cobalt: 99.00 min 
Carbon: 0.15 max 
Manganese: 0.35 max 
Silicon: 0.35 max 
Sulfur: 0.010 max 
Iron: 0. 40 max 
Copper: 0.25 max 

PHYSICAL PROPERTIES 

Density: 0.321 lbs/in3, 8.89 g/cm3

Specific Heat: BTU/lb/° F (J/kg•K): 
32 - 212 ° F (0 - 100 °C): 0.12 (456) 

Thermal Conductivity, BTU/hr/ft2/ft/°F (W/m•K) 
At 212 °F (100 °C): 38.8 (67.1) 
At 400 °F (204 °C): 35.4 (61.3) 
At 600 °F (316 °C): 36.5 (56.3) 

Mean Coefficient of Thermal Expansion: in/inl°F (µm/m•K) 
80 - 200 °F (27 - 93 °C): 7.4 x 10-5 (13.3) 
80 - 400 °F (27 - 204 °C): 7.7x 10-5 (13.9) 
80 - 600 °F (27 - 316 °C): 8.0x 10-5 (14.4) 

Modulus of Elasticity, ksi (MPa) 
30.0 X 103 (207 X 103) 

Melting Range: 2615 - 2535 °F (1435 - 1445 °C) 

FORMS 

Coil - Strip, Foil, Ribbon 
Wire - Profile, Round, Flat, Square 

MECHANICAL PROPERTIES AT ROOM TEMPERATURE PROPERTIES: ANNEALED 

Ultimate Tensile Strength: 55 KSI min (380 MPa min) Yield Strength (0.2% offset): 15 KSI min (100 MPa min) Elongation: 
35% min: gauges s 0.0035 inches 
40% min: gauges > 0.0035 inches 
Hardness: 

HV 117 max: gauges s 0.010 inches 
Rb 66 max: gauges> 0.010 inches 

PROPERTIES: TEMPERED

Nickel 200 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information. 

ADDITIONAL PROPERTIESCORROSION RESISTANCE

Refer to NACE (National Associate of Corrosion Engineers) for recommendations. 


WIRE FINISHES

XC - Extra Clean Bright Annealed or Bright Annealed and Cold Rolled Grease - Ultra bright finish (for decorative applications) 
Soap - Soap coating on tempered wire to act as lubricant 
* Contact Ulbrich Wire with special wire finishes.

HEAT TREATMENT

Nickel 200 is non hardenable by heat treatment.


Additional Information:
  • Delivery Time: 1 to 30 days
  • Packaging Details: Standard Packing
Yes! I am Interested
Get CALLBACK

Nickel Alloy Foils

Nickel Alloy Foils
 
Get Best Quote
Approx. Rs 3,500 / kgsGet Latest Price

Product Details:
Minimum Order Quantity20 kgs
MaterialNickel alloy
Colorsilver
GradeInconel, Hestalloy, Monel
Packaging Typeexport packing
Shapestrip
Size/Dimension5mm to 200mm
Thickness0.06mm to 2mm

we are leading stockists and suppliers of Nickel alloy strip and foils

we can supply from 0.06mm to 2mm thickness upto 200mm width

please contact us with your valuable Inquiries

Additional Information:
  • Delivery Time: 2 to 4 weeks
  • Packaging Details: export packing
Yes! I am Interested
Get CALLBACK

Nickel Sheets

Nickel Sheets
 
Get Best Quote
Approx. Rs 3,000 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity20 Kilogram
Packaging TypePacket
Colorsilver
Grade200/201
Thickness0.5mm to 50mm
Purity99.9%
TypeSheet/Plate
MaterialNickel

We are leading stockists and supliers of Pure Nickel sheets in grade 200 /201

we can supply 0.5mm to 50mm thickness

please send us your valuable Inquiry

Additional Information:
  • Delivery Time: 2 to 4 weeks
  • Packaging Details: standard export packing
Yes! I am Interested
Get CALLBACK

Pure Nickel

Pure Nickel
 
Get Best Quote
Approx. Rs 1,300 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity50 Kilogram
Grade200/201
MaterialNickel
Packaging Sizestandard packing
Usage/ApplicationMelting, furnace
Packaging Typestandard packing
Purity99.5%

we can supply Pure Nickel in form of Ingots, Bars, Sheets, Plates, Foils, Round Bars, Pipes etc

please send us your valuable Inquiry for the same

Additional Information:
  • Delivery Time: 1 to 30 days
  • Packaging Details: stanadard packing
Yes! I am Interested
Explore More Products
X
Find Us Ameet Shah (Om Steel) 87/103, Netterwala Building, Ground Floor 2nd Kumbharwada Lane, Mumbai - 400004, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: