- Home
- ยป
- Our Products
- »
- Nickel Strips & Foils
Nickel Strips & Foils
Nickel 200 Strip
Material | Nickel |
Brand | Technolloy Inc |
Grade | 200 |
Thickness | 0.1 - 4 mm |
Country of Origin | Made in India |
Melting Range | 2615 - 2535 Deg F (1435 - 1445 Deg C) |
Density | 0.321 lbs/in3,8.89 g/cm3 |
Nickel 200 Strip is a wrought commercially pure Nickel with a maximum carbon level of 0.15%. This alloy provides highly ductile mechanical properties across a wide temperature range. It provides corrosion resistance in neutral to moderately reducing environments. Nickel 200 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Nickel 200 is not recommended for service above 600 F (316 C) because long-time exposures in the 800 F to 1200 F range result in precipitation of a carbon containing phase and loss of ductility.
Chemistry Typical:
- Nickel + Cobalt: 99.00 min
- Carbon: 0.15 max
- Manganese: 0.35 max
- Silicon: 0.35 max
- Sulfur: 0.010 max
- Iron: 0. 40 max
- Copper: 0.25 max
Physical Properties:
- Specific Heat: BTU/lb/ F (J/kgK):
- 32 - 212 F (0 - 100 C): 0.12 (456)
- Thermal Conductivity, BTU/hr/ft2/ft/ F (W/mK)
- At 212 F (100C): 38.8 (67.1)
- At 400 F (204C): 35.4 (61.3)
- At 600 F (316C): 36.5 (56.3)
- Mean Coefficient of Thermal Expansion: in/inl F (m/mK)
- 80 - 200 F (27 - 93 C): 7.4 x 10-5 (13.3)
- 80 - 400 F (27 - 204 C): 7.7x 10-5 (13.9)
- 80 - 600 F (27 - 316 C): 8.0x 10-5 (14.4)
- Modulus of Elasticity, ksi (MPa)
- 30.0 X 103 (207 X 103)
Mechanical Properties At Room Temperature Properties:
- Ultimate Tensile Strength: 55 KSI min (380 MPa min) Yield Strength (0.2% offset): 15 KSI min (100 MPa min) Elongation:
- 35% min: gauges s 0.0035 inches
- 40% min: gauges > 0.0035 inches
Hardness:
- HV 117 max: gauges s 0.010 inches
- Rb 66 max: gauges> 0.010 inches
Properties:
- Nickel 200 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information.
- Additional properties corrosion resistance
- Refer to NACE (National Associate of Corrosion Engineers) for recommendations.
Wire Finishes:
- XC - Extra Clean Bright Annealed or Bright Annealed and Cold Rolled Grease - Ultra bright finish (for decorative applications)
- Soap - Soap coating on tempered wire to act as lubricant
- Contact Ulbrich Wire with special wire finishes.
Nickel 201 Strips
Minimum Order Quantity: 1 Kg
Material | Nickel |
Brand | Technolloy Inc |
Grade | 201 |
Thickness | 0.1 - 5 mm |
Surface Finishing | Bright |
Length | 20-50 m |
Width | 3mm to 250mm |
Nickel 201 Strips is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures. It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution. The following section will discuss in detail about nickel 201 alloy.
Chemical Composition:
Element | Content (%) |
---|---|
Nickel, Ni | 99 |
Iron, Fe | 0.4 |
Manganese, Mn | 0.35 |
Silicon, Si | 0.35 |
Copper, Cu | 0.25 |
Carbon, C | 0.020 |
Sulfur, S | 0.010 |
The following table shows the physical properties of nickel 201 alloy:
Properties | Metric | Imperial |
---|---|---|
Density | 8.89 g/cm | 0.321 lb/in |
Melting point | 1435 - 1446C | 2615 - 2635F |
Mechanical Properties:
Properties | Metric | Imperial |
---|---|---|
Tensile strength (annealed) | 403 MPa | 58500 psi |
Yield strength (annealed) | 103 MPa | 14900 psi |
Elongation at break (annealed prior to test) | 50% | 50% |
Thermal Properties:
Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (20-100C/68-212F) | 13.1 m/mC | 7.28 n/inF |
Thermal conductivity | 79.3 W/mK | 550 BTU.in/hrft.F |
Other designations that are equivalent to nickel 201 alloy include the following:
- ASME SB-160 SB 163
- SAE AMS 5553
- DIN 17740
- DIN 17750 - 17754
- BS 3072-3076
- ASTM B 160 - B 163
- ASTM B 725
- ASTM B730
The following are the list of applications of nickel 201 alloy:
- Caustic evaporators
- Combustion boats
- Electronic components
- Plater bars.
Battery Nickel Strip
Material | Nickel |
Brand | Technolloy Inc |
Grade | 200, 201 |
Thickness | 0.10 to 3 mm |
Surface Finishing | Polished |
Country of Origin | Made in India |
Length | 50 - 100 m |
we have Pure Nickel Prime Quality Strips
do contact us for more Information
Battery Nickel Strips
Material | Nickel |
Brand | Technolloy Inc |
Grade | Ni200,Ni201,N4,N6 18650 / 32650 |
Thickness | 0.1 - 5 mm |
Surface Finishing | Bright |
Usage/Application | varoius |
Lithium Battery Copper Strip
Material | Copper |
Brand | Technolloy Inc |
Usage/Application | Lithium Battery |
Thickness | 0.1 to 0.5 mm |
Surface Finishing | Polished |
Country of Origin | Made in India |
Width | 3 to 250 mm |
we are specialists in this product. do share with us your valuable Inquiry.
Nickel Strips
Minimum Order Quantity: 1 Kg
Material | Nickel |
Brand | Technolloy |
Grade | 200/201 |
Color | Silver |
Thickness | 0.1mm to 0.5mm |
Surface Finishing | Bright |
Surface Treatment | Anneled |
we are specialists in this kind of Strips in thickness from 0.1mm to 0.5mm in varoius width.
Additional Information:
- Production Capacity: 10000 kg
- Delivery Time: immidiate
- Packaging Details: Standard Packing
Nickel Foils
Minimum Order Quantity: 20 Kg
Usage/Application | Industrial |
Material | Nickel |
Brand | Technolloy Inc |
Grade | 200/201 |
Thickness | 0.1mm to 1mm |
Width | 3mm to 250mm |
we have wide range of Nickel Foils available in ready stock.
this kind of FOils widely used in Various Electronic and battery Purpose
Nickel Alloy Foils
Material | Nickel Alloy |
Brand | Technolloy Inc |
Size/Dimension | 5 to 200 mm |
Thickness | 0.06 to 2 mm |
Country of Origin | Made in India |
Surface Finishing | Polished |
Usage | Construction |