Technolloy Inc

Mumbai, Maharashtra

GST No. 27CMOPD2928J1ZR

View Mobile No.

our range

Nickel Strips

We are a leading Manufacturer of battery nickel strip, nickel 200 strip, nickel foils and nickel 201 strips from Mumbai, India.
Battery Nickel Strip

Battery Nickel Strip

Rs 3,500  / KgGet Best Price
MaterialNickel
BrandTechnolloy Inc
Grade200, 201
Thickness0.10 to 3 mm
Surface FinishingPolished
Length50 - 100 m
Country of OriginMade in India
We are specialists In Nickel Strips for Battery Welding Purpose

we have Pure Nickel Prime Quality Strips

do contact us for more Information

View Complete details

get quoterequest a call back
Nickel 200 Strip

Nickel 200 Strip

Rs 4,000  / KgGet Best Price
Country of OriginMade in India
MaterialNickel
BrandTechnolloy Inc
Grade200
Thickness0.1 - 4 mm
Melting Range2615 - 2535 Deg F (1435 - 1445 Deg C)
Density0.321 lbs/in3,8.89 g/cm3

Nickel 200 Strip is a wrought commercially pure Nickel with a maximum carbon level of 0.15%. This alloy provides highly ductile mechanical properties across a wide temperature range. It provides corrosion resistance in neutral to moderately reducing environments. Nickel 200 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Nickel 200 is not recommended for service above 600  F (316 C) because long-time exposures in the 800 F to 1200 F range result in precipitation of a carbon containing phase and loss of ductility. 

Chemistry Typical:

  • Nickel + Cobalt: 99.00 min 
  • Carbon: 0.15 max 
  • Manganese: 0.35 max 
  • Silicon: 0.35 max 
  • Sulfur: 0.010 max 
  • Iron: 0. 40 max 
  • Copper: 0.25 max 

 

Physical Properties:
  • Specific Heat: BTU/lb/ F (J/kgK): 
  • 32 - 212 F (0 - 100 C): 0.12 (456) 
  • Thermal Conductivity, BTU/hr/ft2/ft/ F (W/mK) 
  • At 212 F (100C): 38.8 (67.1) 
  • At 400 F (204C): 35.4 (61.3) 
  • At 600 F (316C): 36.5 (56.3) 
  • Mean Coefficient of Thermal Expansion: in/inl F (m/mK) 
  • 80 - 200 F (27 - 93 C): 7.4 x 10-5 (13.3) 
  • 80 - 400 F (27 - 204 C): 7.7x 10-5 (13.9) 
  • 80 - 600 F (27 - 316 C): 8.0x 10-5 (14.4) 
  • Modulus of Elasticity, ksi (MPa) 
  • 30.0 X 103 (207 X 103) 

 

Mechanical Properties At Room Temperature Properties: 
  • Ultimate Tensile Strength: 55 KSI min (380 MPa min) Yield Strength (0.2% offset): 15 KSI min (100 MPa min) Elongation: 
  • 35% min: gauges s 0.0035 inches 
  • 40% min: gauges > 0.0035 inches 


Hardness: 

  • HV 117 max: gauges s 0.010 inches 
  • Rb 66 max: gauges> 0.010 inches 

Properties:
  • Nickel 200 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information. 
  • Additional properties corrosion resistance
  • Refer to NACE (National Associate of Corrosion Engineers) for recommendations. 

Wire Finishes:

  • XC - Extra Clean Bright Annealed or Bright Annealed and Cold Rolled Grease - Ultra bright finish (for decorative applications) 
  • Soap - Soap coating on tempered wire to act as lubricant 
  • Contact Ulbrich Wire with special wire finishes.

View Complete details

get quoterequest a call back
  • Nickel Foils
  • Nickel Foils
Nickel Foils

Nickel Foils

Rs 4,500  / KgGet Best Price
Usage/ApplicationIndustrial
MaterialNickel
BrandTechnolloy Inc
Grade200/201
Thickness0.06 to 2 mm
Width5 to 200 mm
We are specialists in Pure Nickel 200/201 Grdae Shims & Foils 
we have wide range of Nickel Foils available in ready stock.
this kind of FOils widely used in Various Electronic and battery Purpose

View Complete details

get quoterequest a call back
  • Nickel 201 Strips
  • Nickel 201 Strips
  • Nickel 201 Strips
Nickel 201 Strips

Nickel 201 Strips

Rs 4,000  / KgGet Best Price
MaterialNickel
BrandTechnolloy Inc
Grade201
Thickness0.1 - 5 mm
Surface FinishingPolished
Length20-50 m
Width10 to 500 mm

Nickel 201 Strips is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures. It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution. The following section will discuss in detail about nickel 201 alloy.

Chemical Composition:

ElementContent (%)
Nickel, Ni99
Iron, Fe 0.4
Manganese, Mn 0.35
Silicon, Si 0.35
Copper, Cu0.25
Carbon, C0.020
Sulfur, S 0.010


The following table shows the physical properties of nickel 201 alloy:

PropertiesMetricImperial
Density8.89 g/cm30.321 lb/in3
Melting point1435 - 1446°C2615 - 2635°F

Mechanical Properties:
PropertiesMetricImperial
Tensile strength (annealed)403 MPa58500 psi
Yield strength (annealed)103 MPa14900 psi
Elongation at break (annealed prior to test)50%50%

Thermal Properties:
PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)13.1 µm/m°C7.28 µin/in°F
Thermal conductivity79.3 W/mK550 BTU.in/hrft².°F


Other designations that are equivalent to nickel 201 alloy include the following:

  • ASME SB-160 – SB 163
  • SAE AMS 5553
  • DIN 17740
  • DIN 17750 - 17754
  • BS 3072-3076
  • ASTM B 160 - B 163
  • ASTM B 725
  • ASTM B730


The following are the list of applications of nickel 201 alloy:

  • Caustic evaporators
  • Combustion boats
  • Electronic components
  • Plater bars.

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES